WhichRemote Send a photo

CAME ATOMO AT02 remote

The CAME ATOMO AT02 is a rolling-code remote on 433.92 MHz, so a cheap universal remote can’t copy it. It’s paired at your motor, or from a remote that already works, and we send simple steps for yours.

Brand
CAME
Model
ATOMO AT02
Frequency
433.92 MHz
Code
Rolling code
Works with
001AF43SR plug-in rolling-code card, RE432RC, RBE4RC and more

£42.99 genuine remote, with set-up help

Optional. If it turns out not to be the right remote for your door, we’ll replace it or refund you.

Buy now

UK delivery £3.99. By buying you agree to our terms of sale, including your 14-day right to cancel.

Not sure it’s yours? Check with a photo before you buy.

About the CAME ATOMO AT02

This two-button fob is one of CAME’s original ATOMO rolling-code remotes, alongside the one-button AT01 and four-button AT04. A new code is set by self-learning: holding a memorised ATOMO remote’s button until its light stays on, then pressing the new fob’s button. It needs a rolling-code receiver such as the AF43SR, RE432RC or RBE4RC; a panel using an AF43S receiver won’t learn it.

Is this your remote?

Look on the label or the back of the remote for:

ATOMOAT02001AT02AT01433.92 MHz

What it looks like: A small fob with two buttons.

Don’t mix it up: It shares its case with the fixed-code TOP-432NA, so check the code type before ordering rather than going by looks alone.

Also sold as: 001AT02, AT02, AT01, 001AT01.

Still not sure? Upload a photo below and we’ll match it, or send it and we’ll check it by hand.

What it works with

  • 001AF43SR plug-in rolling-code card
  • RE432RC
  • RBE4RC
  • 001RE432M
  • 001RBE4N / RBE4024 / RBE4230

How it’s set up

This is a rolling-code remote: its signal changes every time you press it, so a universal copying remote won’t work. It has to be paired with your system, either at the motor or receiver, usually with a learn or program button, or from a remote that already works. It normally takes a couple of minutes. Rolling code vs fixed code explains why.

We email simple steps for your system with every order, and if it won’t pair, email us and we’ll walk you through it.

Other CAME remotes

Every remote we sell

Not sure which remote you need?

Send us a photo of the remote, the motor or the box on the wall, whichever you can get to. We’ll reply the same day with the exact model and what it costs.

It’s free, and you don’t have to buy it from us.

Send us a photo

Instant match

Your remote, motor or control box

Whichever you can actually get to. A close photo of the label works best.

We read it on your device to find a match. It’s only sent to us if you press Send. Privacy
Rather email? Email us a photo

Free, and no obligation. We’ll tell you what you need even if you buy it elsewhere.