WhichRemote Send a photo

Chamberlain TX4RUNI remote

The Chamberlain TX4RUNI is a rolling-code remote on 433.92 MHz, so a cheap universal remote can’t copy it. It’s paired at your motor, or from a remote that already works, and we send simple steps for yours.

Brand
Chamberlain
Model
TX4RUNI
Frequency
433.92 MHz
Code
Rolling code
Works with
ML510EV, ML550EV, ML580EV and more

£34.99 genuine remote, with set-up help

Optional. If it turns out not to be the right remote for your door, we’ll replace it or refund you.

Buy now

UK delivery £3.99. By buying you agree to our terms of sale, including your 14-day right to cancel.

Not sure it’s yours? Check with a photo before you buy.

About the Chamberlain TX4RUNI

This universal keyring remote has four buttons and a rolling code, built for Chamberlain’s Evolution range including the ML510EV, ML550EV, ML580EV, ML700EV, ML800EV, ML810EV, ML1000EV and ML1040EV, plus the CHLA250EVC, CHAA250EVC, CHSL400EVC and TPD10-05. It covers both the older and newer coding generations used across these openers, so it’s a handy option if you’re unsure which exact remote your system needs. LiftMaster sells the same remote as the TX4UNIS.

Is this your remote?

Look on the label or the back of the remote for:

TX4RUNITX4RUNI-01433.92 MHz433MHz

What it looks like: A small silver-grey fob with four buttons, a white light and a keyring loop.

Don’t mix it up: It’s easily mixed up with the TX2REV and TX4REV, which look similar but run on 868 MHz and have a blue light rather than white.

Also sold as: TX4RUNI-01, TXR4UNI.

Still not sure? Upload a photo below and we’ll match it, or send it and we’ll check it by hand.

What it works with

  • ML510EV
  • ML550EV
  • ML580EV
  • ML700EV
  • ML800EV
  • ML810EV
  • ML1000EV
  • ML1040EV
  • CHLA250EVC
  • CHAA250EVC

And more. Send us a photo of your motor if you want us to check.

How it’s set up

This is a rolling-code remote: its signal changes every time you press it, so a universal copying remote won’t work. It has to be paired with your system, either at the motor or receiver, usually with a learn or program button, or from a remote that already works. It normally takes a couple of minutes. Rolling code vs fixed code explains why.

We email simple steps for your system with every order, and if it won’t pair, email us and we’ll walk you through it.

Other Chamberlain remotes

Every remote we sell

Not sure which remote you need?

Send us a photo of the remote, the motor or the box on the wall, whichever you can get to. We’ll reply the same day with the exact model and what it costs.

It’s free, and you don’t have to buy it from us.

Send us a photo

Instant match

Your remote, motor or control box

Whichever you can actually get to. A close photo of the label works best.

We read it on your device to find a match. It’s only sent to us if you press Send. Privacy
Rather email? Email us a photo

Free, and no obligation. We’ll tell you what you need even if you buy it elsewhere.