WhichRemote Send a photo

LiftMaster TX4UNIS remote

The LiftMaster TX4UNIS is a rolling-code remote on 433.92 MHz, so a cheap universal remote can’t copy it. It’s paired at your motor, or from a remote that already works, and we send simple steps for yours.

Brand
LiftMaster
Model
TX4UNIS
Frequency
433.92 MHz
Code
Rolling code
Works with
All Chamberlain/LiftMaster/MotorLift openers and receivers with 433 MHz radio except LM50K, ML510 and HE500AN, LM60EV-LM130EV Evolution series, LM60/LM80 and more

£28.99 genuine remote, with set-up help

Optional. If it turns out not to be the right remote for your door, we’ll replace it or refund you.

Buy now

UK delivery £3.99. By buying you agree to our terms of sale, including your 14-day right to cancel.

Not sure it’s yours? Check with a photo before you buy.

About the LiftMaster TX4UNIS

The TX4UNIS is a universal 433 MHz remote with four buttons under a sliding cover and a white light, replacing the earlier TX4UNI. It works across most 433 MHz Chamberlain, LiftMaster and MotorLift openers and receivers, including the Evolution series LM60EV to LM130EV and the LM60, LM80, LM600, LM800 and LM1000 ranges, though it won’t work with the LM50K, ML510 or HE500AN. Its Chamberlain-branded equivalent is the TX4RUNI.

Is this your remote?

Look on the label or the back of the remote for:

TX4UNISTX4UNIS-02433 MHz433MHz

What it looks like: A fob usually in matt black with a sliding cover over four buttons, a white light and a keyring loop.

Don’t mix it up: It looks similar to the TX2EV, TX4EV and TX4EVS, but those run on 868 MHz with a blue light instead of white, and the two families aren’t compatible.

Also sold as: TX4UNIS-02.

Still not sure? Upload a photo below and we’ll match it, or send it and we’ll check it by hand.

What it works with

  • All Chamberlain/LiftMaster/MotorLift openers and receivers with 433 MHz radio except LM50K, ML510 and HE500AN
  • LM60EV-LM130EV Evolution series
  • LM60/LM80
  • LM600/LM800/LM1000-433
  • ML700-GB/ML850-GB
  • 860EV
  • RX1EV
  • STAR1000EV
  • PR433-4

How it’s set up

This is a rolling-code remote: its signal changes every time you press it, so a universal copying remote won’t work. It has to be paired with your system, either at the motor or receiver, usually with a learn or program button, or from a remote that already works. It normally takes a couple of minutes. Rolling code vs fixed code explains why.

We email simple steps for your system with every order, and if it won’t pair, email us and we’ll walk you through it.

Other LiftMaster remotes

Every remote we sell

Not sure which remote you need?

Send us a photo of the remote, the motor or the box on the wall, whichever you can get to. We’ll reply the same day with the exact model and what it costs.

It’s free, and you don’t have to buy it from us.

Send us a photo

Instant match

Your remote, motor or control box

Whichever you can actually get to. A close photo of the label works best.

We read it on your device to find a match. It’s only sent to us if you press Send. Privacy
Rather email? Email us a photo

Free, and no obligation. We’ll tell you what you need even if you buy it elsewhere.