WhichRemote Send a photo

Hörmann HS 4 (868 MHz) remote

The Hörmann HS 4 (868 MHz) is a fixed-code remote on 868.3 MHz. You set it to match your existing code, usually by copying it from the remote you have, and we send simple steps for yours.

Brand
Hörmann
Model
HS 4 (868 MHz)
Frequency
868.3 MHz
Code
Fixed code
Works with
SupraMatic Series 2, ProMatic Series 2 and gate operators before July 2012, HE / HER / HET fixed-code 868 MHz receivers, Garador operators 2005-2011

£59.99 genuine remote, with set-up help

Optional. If it turns out not to be the right remote for your door, we’ll replace it or refund you.

Buy now

UK delivery £3.99. By buying you agree to our terms of sale, including your 14-day right to cancel.

Not sure it’s yours? Check with a photo before you buy.

About the Hörmann HS 4 (868 MHz)

The HS 4 is a large, slim handset from Hörmann’s 868 MHz fixed-code family, with four light blue buttons in a diamond pattern. It shares its electronics with the smaller HSM 4 868 and works with Series 2 SupraMatic and ProMatic operators, gate operators before July 2012, HE, HER and HET fixed-code receivers, and Garador operators from 2005 to 2011. It isn’t compatible with newer BiSecur receivers.

Is this your remote?

Look on the label or the back of the remote for:

HS4-868868 MHz

What it looks like: A large slim grey handset with four light blue buttons in a diamond pattern and a red light.

Don’t mix it up: It uses the same case as the HS 4 40 MHz and HS 4 26.975 MHz versions, so check the button colour, light blue rather than grey or green, before choosing.

Also sold as: HS4-868, HS 4 868, HS4, Hörmann article 437549, Garador part 680.

Still not sure? Upload a photo below and we’ll match it, or send it and we’ll check it by hand.

What it works with

  • SupraMatic Series 2, ProMatic Series 2 and gate operators before July 2012
  • HE / HER / HET fixed-code 868 MHz receivers
  • Garador operators 2005-2011

How it’s set up

This is a fixed-code remote: it sends the same signal every time, so you set it to match the code your door already uses, either by copying it from your current remote or by setting the same code inside it. Rolling code vs fixed code explains the difference.

We email simple steps for your system with every order, and if it won’t pair, email us and we’ll walk you through it.

Other Hörmann remotes

Every remote we sell

Not sure which remote you need?

Send us a photo of the remote, the motor or the box on the wall, whichever you can get to. We’ll reply the same day with the exact model and what it costs.

It’s free, and you don’t have to buy it from us.

Send us a photo

Instant match

Your remote, motor or control box

Whichever you can actually get to. A close photo of the label works best.

We read it on your device to find a match. It’s only sent to us if you press Send. Privacy
Rather email? Email us a photo

Free, and no obligation. We’ll tell you what you need even if you buy it elsewhere.