NVM NT1016 remote
The NVM NT1016 is a rolling-code remote on 433.92 MHz, so a cheap universal remote can’t copy it. It’s paired at your motor, or from a remote that already works, and we send simple steps for yours.
- Brand
- NVM
- Model
- NT1016
- Frequency
- 433.92 MHz
- Code
- Rolling code
- Works with
- NVM NT1004, NVM NT1006, NVM NT1008 and more
£29.99 genuine remote, with set-up help
Optional. If it turns out not to be the right remote for your door, we’ll replace it or refund you.
Buy nowUK delivery £3.99. By buying you agree to our terms of sale, including your 14-day right to cancel. If a remote turns out to be discontinued, we’ll refund you in full.
Not sure it’s yours? Check with a photo before you buy.
About the NVM NT1016
The NT1016 is NVM’s current single channel keyfob for roller shutter and garage door control units supplied from May 2012 onwards. It uses rolling code and a CR2032 battery, and replaced the earlier NT1103A, which looks very similar but takes a different battery and only works with older control units.
Is this your remote?
Look on the label or the back of the remote for:
NT1016
What it looks like: A chrome fob with a sliding cover over three buttons marked Up, Stop and Down, with a keyring clip.
Don’t mix it up: Very similar in looks to the discontinued NT1103A; the giveaway is the battery type and the date the control unit was installed, since the two are not interchangeable.
Still not sure? Upload a photo below and we’ll match it, or send it and we’ll check it by hand.
What it works with
- NVM NT1004
- NVM NT1006
- NVM NT1008
- NVM NT1019
- NVM NT1105
- NVM NT1103 v2+
How it’s set up
This is a rolling-code remote: its signal changes every time you press it, so a universal copying remote won’t work. It has to be paired with your system, either at the motor or receiver, usually with a learn or program button, or from a remote that already works. It normally takes a couple of minutes. Rolling code vs fixed code explains why.
We email simple steps for your system with every order, and if it won’t pair, email us and we’ll walk you through it.
Seen it cheaper somewhere else?
Check it’s the genuine NVM remote. Many cheaper listings are copies or “compatible” remotes, not the manufacturer’s own. A genuine NVM remote has the NVM name on it, usually on the front or on the label on the back, along with the model name. Copies often leave the name off, and some won’t pair with a rolling-code system at all. A universal remote that works by copying can’t copy a rolling code.
Every remote we sell is the genuine NVM remote, with set-up help included.
Other NVM remotes
- NVM NT1216N remote £34.99
- NVM NT1017 remote £29.99
- NVM NT1018 remote £29.99
- NVM NT1118 remote £29.99
Not sure which remote you need?
Send us a photo of the remote, the motor or the box on the wall, whichever you can get to. We’ll reply the same day with the exact model and what it costs.
It’s free, and you don’t have to buy it from us.
Send us a photo
Instant matchFree, and no obligation. We’ll tell you what you need even if you buy it elsewhere.