Ansa TEC-4 remote

About the Ansa TEC-4

The TEC-4 is Ansa’s current four button remote, using 433.92 MHz Keeloq rolling code. It works with Ansa’s standard control panels, including the UD-5 and GC-4 receivers, and is sold as the direct replacement for Ansa’s earlier Deco TX4, Metallo and ATX-1 handsets.

Is this your remote?

Look on the label or the back of the remote for:

TEC-4Keeloq

What it looks like: A fob with chrome edged trim and four buttons.

Don’t mix it up: Easily confused with the earlier Deco-4, a similar four button remote now mostly out of stock; the TEC-4 has chrome edged trim where the Deco-4 does not.

Also sold as: SKU 1009.

Still not sure? Upload a photo below and we’ll match it, or send it and we’ll check it by hand.

What it works with

• All Ansa systems, including UD-5 and GC-4 receivers

How it’s set up

This is a rolling-code remote: its signal changes every time you press it, so a universal copying remote won’t work. It has to be paired with your system, either at the motor or receiver, usually with a learn or program button, or from a remote that already works. It normally takes a couple of minutes. Rolling code vs fixed code explains why.

We email simple steps for your system with every order, and if it won’t pair, email us and we’ll walk you through it.

Seen it cheaper somewhere else?

Check it’s the genuine Ansa remote. Many cheaper listings are copies or “compatible” remotes, not the manufacturer’s own. A genuine Ansa remote has the Ansa name on it, usually on the front or on the label on the back, along with the model name. Copies often leave the name off, and some won’t pair with a rolling-code system at all. A universal remote that works by copying can’t copy a rolling code.

Every remote we sell is the genuine Ansa remote, with set-up help included.

Other Ansa remotes

• Ansa TEC-2 remote £31.99
• Ansa Deco-2 remote £31.99
• Ansa Metallo Henderson remote £36.99

Every remote we sell