How to copy your old CAME remote onto a TOP-EV, TAM or TWIN remote
CAME’s leaflets for these remotes describe copying the code of a working remote onto the new one, so nothing needs changing at the receiver.
For: Any CAME receiver that already works with your old CAME fixed-code remote
Before you start
- The two remotes must be the same code type and the same frequency (433.92 or 868.35 MHz).
- Below, A is your working remote and B is the new one.
Copy the code
- On the new remote (B), press the two buttons together and hold them until the LED flashes quicker.
- Press the button you want to set up on B. The LED lights steadily.
- Within 10 seconds, hold the working remote (A) against the back of B and press, for a few instants, the button on A that you want to copy.
- The LED on B flashes 3 times when the code is saved.
Not covered on this page
The leaflets give no hold time for step 1. Adding a remote at the receiver isn’t covered on this page.
Remotes this guide is for
Where these steps come from
Our own wording of the manufacturer's instructions. If your opener's manual says something different, follow the manual.
- CAME TOP-43xEV leaflet 119RV33
- CAME TOP-86xEV leaflet 119RW37
- CAME TAM-432SA leaflet 119RT71
- CAME TWIN2 / TWIN4 leaflets 119RU63 and 119RU65
Still stuck? Email info.whichremote@gmail.com with your motor model and we’ll walk you through it.
Not sure which remote you need?
Send us a photo of the remote, the motor or the box on the wall, whichever you can get to. We’ll reply the same day with the exact model and what it costs.
It’s free, and you don’t have to buy it from us.
Send us a photo
Instant matchFree, and no obligation. We’ll tell you what you need even if you buy it elsewhere.