How to copy your old CAME remote onto a TW2EE or TOPD2FGS

For: Any CAME receiver that already works with your old CAME fixed-code remote

Before you start

• Your old remote can be a TOP, TAM or TWIN on 433.92 MHz. Below, A is the old remote and B is the new one.

Copy the code

1. On the new remote (B), hold both buttons together for about 5 seconds. The LED flashes fast.
2. Press the button on B that you want to set up. The LED lights steadily.
3. Within 10 seconds, hold B against the working remote (A) and press the button on A that you want to copy. The LED on B flashes three times.

Good to know

• The TOPD2FGS can transmit on 433.92 MHz, on 868.35 MHz, or both, set per button. The remote’s frequency has to match your receiver’s.

Not covered on this page

We read the TOPD2FGS steps from a small picture on its leaflet, so check them against the leaflet in your pack. The TW4EE and TOPD4FGS aren’t covered on this page yet.

Remotes this guide is for

• CAME TW2EE
• CAME TOPD2FGS

Where these steps come from

Our own wording of the manufacturer's instructions. If your opener's manual says something different, follow the manual.

• CAME TW2EE pack leaflet FA01189M27
• CAME TOPD2FGS pack leaflet FA00621M27

Still stuck? Email info.whichremote@gmail.com with your motor model and we’ll walk you through it.