How to set a Nice FLO1, FLO2 or FLO4 remote to your code
A FLO remote is fixed code, so there is nothing to pair. You set its small switches to the same code as your receiver, following Nice’s leaflet.
For: Nice FLO fixed-code receivers (FLOX1, FLOX2, FLOXB2, FLOXI, FLOXI2, FLOXM and SMXIF)
Before you start
- Press a button on the remote and check its LED lights. If it is dim or slow, fit a new 12 V 23A battery first.
Set the code
- Open the remote. Inside are 10 small DIP switches.
- Set them to the same ON and OFF pattern as the 10 switches on your receiver, or on your old remote if it uses the same code.
- Close the remote and test it.
Good to know
- There is nothing to save or delete: the code is simply the pattern of the switches.
Not covered on this page
How the ON and OFF positions are marked can differ between boards. If you are not sure, email us a photo of your receiver.
Remotes this guide is for
Where these steps come from
Our own wording of the manufacturer's instructions. If your opener's manual says something different, follow the manual.
Still stuck? Email info.whichremote@gmail.com with your motor model and we’ll walk you through it.
Not sure which remote you need?
Send us a photo of the remote, the motor or the box on the wall, whichever you can get to. We’ll reply the same day with the exact model and what it costs.
It’s free, and you don’t have to buy it from us.
Send us a photo
Instant matchFree, and no obligation. We’ll tell you what you need even if you buy it elsewhere.