How to copy an old Nice INTI remote onto a new INTI remote
On Nice’s INTI remotes, the old remote passes a secret code to the new one, and the receiver then adds the new remote the first time you use it.
For: A Nice receiver that already works with your old INTI remote
Before you start
- This only works between two INTI (O-Code) remotes.
Copy the code
- Hold the new and old remotes touching each other.
- On the new remote, press any button and hold it until the old remote’s LED lights, then let go. The old remote’s LED starts blinking.
- On the old remote, press any button and hold it until the new remote’s LED lights, then let go. The LED goes out: done.
- The receiver learns the new remote during its first 20 uses.
Good to know
- If the LEDs flash an error, it can mean: 4 transfer disabled, 6 transfer disabled between different remote types, 10 communication error, 15 took too long.
Not covered on this page
The receiver can be set to refuse this method. Adding an INTI at the receiver isn’t covered on this page.
Remotes this guide is for
Where these steps come from
Our own wording of the manufacturer's instructions. If your opener's manual says something different, follow the manual.
Still stuck? Email info.whichremote@gmail.com with your motor model and we’ll walk you through it.
Not sure which remote you need?
Send us a photo of the remote, the motor or the box on the wall, whichever you can get to. We’ll reply the same day with the exact model and what it costs.
It’s free, and you don’t have to buy it from us.
Send us a photo
Instant matchFree, and no obligation. We’ll tell you what you need even if you buy it elsewhere.