How to add a Somfy Keygo 4 RTS to a Rollixo RTS receiver

For: Somfy Rollixo RTS receiver

Before you start

• You are close to the receiver, with the new Keygo in your hand.

Add the remote

1. Press the Prog button on the receiver until its indicator light comes on and stays on.
2. Within 2 minutes, press a button on the Keygo you are adding.
3. The light above Prog flashes. The remote is now memorised.

• Repeat for each remote you want to add.
• Doing the same steps with a remote that is already memorised removes it again.

Deleting remotes

• To clear every remote, hold Prog on the receiver for about 7 seconds until the light goes out, then let go. The light flashes slowly and all remotes are cleared.

Not covered on this page

Other Somfy motors (for example Dexxo Pro) and copying from a remote that already works aren’t covered on this page yet. Email us your motor model.

Remotes this guide is for

• Somfy Keygo 4 RTS

Where these steps come from

Our own wording of the manufacturer's instructions. If your opener's manual says something different, follow the manual.

• Somfy Rollixo RTS manual (memorising the remote controls, pages 17 to 18)
• Somfy Keygo RTS and io leaflet 5150312A

Still stuck? Email info.whichremote@gmail.com with your motor model and we’ll walk you through it.