How to add a CAME ATOMO remote using one that is already stored

For: A CAME receiver that already has a working ATOMO remote stored (not the RBE4RC receiver)

Before you start

• Stand within 5 metres of the receiver.
• You need one ATOMO remote that is already stored in the receiver.

Add the new remote

1. On a remote that is already stored, press a button and hold it until the LED stays lit.
2. Within 20 seconds, press a button on the new remote.
3. Wait 20 seconds before using the new remote.
4. Repeat for each extra remote.

Good to know

• A receiver holds at most 25 remotes.
• The leaflet doesn’t say which button on the new remote gets which function, or whether every button needs its own pass. Pressing the button you want to add sets it.

Not covered on this page

Adding a remote at the receiver itself, and the RBE4RC receiver (which this method doesn’t work with), aren’t covered on this page.

Remotes this guide is for

• CAME ATOMO AT02
• CAME ATOMO AT04
• CAME ATOMO AT02EV
• CAME ATOMO D AT02D
• CAME ATOMO D AT04D

Where these steps come from

Our own wording of the manufacturer's instructions. If your opener's manual says something different, follow the manual.

• CAME ATOMO AT04D leaflet FA00003M09
• CAME ATOMO AT04EV leaflet FA00020M09

Still stuck? Email info.whichremote@gmail.com with your motor model and we’ll walk you through it.