How to add a Somfy Keygo or Keytis RTS remote to a Dexxo Optimo RTS motor

For: Somfy Dexxo Optimo RTS

Add a button for full opening

1. Press and hold the motor’s PROG button for 2 seconds. The motor’s light flashes.
2. Press the button on the remote that should open and close the door.
3. The motor’s light should flash for about 5 seconds. That is the motor confirming the button is stored.

• Repeat for each button you want. The motor holds up to 32 channels, and doing this for a button that is already stored clears it.

Other functions on the same motor

• Partial opening: hold PROG for 2 seconds, press PROG once briefly, then press the remote button.
• Lighting: hold PROG for 2 seconds, press PROG twice more briefly, then press the remote button.

Deleting remotes

• To clear every remote, hold PROG until the light blinks (about 7 seconds). Don’t hold SET for 7 seconds: that wipes the motor’s settings.

Not covered on this page

Other Somfy motors aren’t covered on this page yet.

Remotes this guide is for

• Somfy Keygo 4 RTS
• Somfy Keytis 4 RTS
• Somfy Keytis 2 RTS

Where these steps come from

Our own wording of the manufacturer's instructions. If your opener's manual says something different, follow the manual.

• Somfy Dexxo Optimo RTS manual 5056737D

Still stuck? Email info.whichremote@gmail.com with your motor model and we’ll walk you through it.