WhichRemote Send a photo

Gliderol TM-868C (New Style) remote

The Gliderol TM-868C (New Style) is a rolling-code remote on 868 MHz, so a cheap universal remote can’t copy it. It’s paired at your motor, or from a remote that already works, and we send simple steps for yours.

Brand
Gliderol
Model
TM-868C (New Style)
Frequency
868 MHz
Code
Rolling code
Works with
Glidermatic GRD+, Roll.in.One Retrofit Motor, Glidermatic GRD Control Box

£53.99 genuine remote, with set-up help

Total with UK delivery (£3.99): £57.98

UK delivery, usually 2 to 5 working days

Optional. If it turns out not to be the right remote for your door, we’ll replace it or refund you.

Buy now for £57.98

Need two? You can change the quantity on the next page.

By buying you agree to our terms of sale, including your 14-day right to cancel. If a remote turns out to be discontinued, we’ll refund you in full. New to us? See how your order is protected.

Not sure it’s yours? Check with a photo before you buy.

Product information: Gliderol TM-868C (New Style)

BrandGliderol
ModelTM-868C
Frequency868 MHz
Type of programmingRolling code. Paired to your motor or receiver, or from a remote that already works. What that means

About the Gliderol TM-868C (New Style)

The TM-868C is the handset Gliderol calls its new style: a three-button 868MHz fob that can control up to three doors. Gliderol lists it for its GRD+ motors and the Roll.in.One retrofit motor, and its own programming sheet for the Glidermatic GRD control box shows the same handset. Gliderol lists the older Panel Glide handset as obsolete and points customers to this one instead.

Is this your remote?

What it looks like: A dark grey rectangular fob with one large pale blue oval button, two smaller blue buttons below it, a small light window and ribbed grooves down one side.

Don’t mix it up: Some retailers say Henderson roller shutter handsets share this style, sometimes with red buttons in place of the blue ones.

Also sold as: TM868C, TM 305C, TM305C, GNS868, New Style Handset, Gliderol part 5087.

Still not sure? Upload a photo below and we’ll match it, or send it and we’ll check it by hand.

What it works with

How it’s set up

This is a rolling-code remote: its signal changes every time you press it, so a universal copying remote won’t work. It has to be paired with your system, either at the motor or receiver, usually with a learn or program button, or from a remote that already works. It normally takes a couple of minutes. Rolling code vs fixed code explains why.

We email simple steps for your system with every order, and if it won’t pair, email us and we’ll walk you through it.

Seen it cheaper somewhere else?

Check it’s the genuine Gliderol remote. Many cheaper listings are copies or “compatible” remotes, not the manufacturer’s own. A genuine Gliderol remote has the Gliderol name on it, usually on the front or on the label on the back, along with the model name. Copies often leave the name off, and some won’t pair with a rolling-code system at all. A universal remote that works by copying can’t copy a rolling code.

Every remote we sell is the genuine Gliderol remote, with set-up help included.

Other Gliderol remotes

Every remote we sell

Not sure which remote you need?

Send us a photo of the remote, the motor or the box on the wall, whichever you can get to. We’ll reply the same day with the exact model and what it costs.

It’s free, and you don’t have to buy it from us.

Send us a photo

Instant match

Your remote, motor or control box

Whichever you can actually get to. A close photo of the label works best.

We read it on your device to find a match. It’s only sent to us if you press Send. Privacy
Rather email? Email us a photo

Free, and no obligation. We’ll tell you what you need even if you buy it elsewhere.